Menu

Preet 6049 tractor full specifications + Gear speeds :

Preet 6049 tractor has 4 cylinder naturally aspirated liquid cooled engine with 4088 CC displacement which can produce about 60 hp at 2200 engine rated RPM. Tractor has 1800 kg weight lifting capacity with 3 point linkage system. Tractor has 67 liters fuel tank capacity which increases time intervals for refueling. Tractor has both manual & power steering system options according to operator’s demand. Here are some more specifications of tractor:

Engine

Specifications Data
1. Engine Make No data available
2. Engine Type
  • 4 Cylinder
  • 4 Stroke
  • Naturally aspirated
  • Liquid Cooled
  • Direct Injection
  • Diesel Engine
3. Max Torque 245 +- 5% Nm
4. HP 60 hp category
5. Bore*Stroke (MM) 105*118 mm
6. Displacement 4088 CC
7. Engine rated RPM 2200
8. Pump Inline Bosch
9. Max engine RPM in tachometer 3000
10. SFC No data available
11. Idle RPM 650 +- 50
12. Max. RPM at no load 2350 +-100
13. Firing order 1-3-4-2
14. Compression ratio 18.5+-1:1
15. Fuel injections timing 8°+-1° BTDC

Transmission

Specifications Data
1. Clutch type & size Single with 280 mm diameter (standard)
Dual with 280 mm dia (optional)
2. Transmission 8F+2R
3. Clutch paddle free play 20-25 mm
4. Transmission type Sliding mesh

Gear speed of tractor

Gear Speed
L1 2.82
L2 3.48
L3 5.75
L4 9.10
H1 11.11
H2 13.73
H3 22.99
H4 35.86
L-R 3.77
H-R 15.58

Brakes

Specifications Data
1. Type Multidisc mechanical brakes (standard)
Wet brakes (optional)
2. Minimum turning diameter with brakes No data available
3. Minimum turning diameter without brakes 4.1 meter
4. Brake paddle free play 35 to 40 mm

Steering

Specifications Data
1. Mechanical Available (standard)
2. Power Available (optional)
3. Oil capacity (power steering) 2 liters
4. Oil capacity (mechanical steering) 0.5 liter

PTO

Specifications Data
1. PTO HP @ Rated RPM No data available
2. PTO speeds-Standard 540 PTO CR (No data available about engine RPM)
3. PTO speeds – Economy Not available
4. PTO speeds – Reverse Not available
5. PTO speeds – Ground speed Not available

Hydraulics

Specifications Data
1. Type Live Auto depth and draft control
2. Weight lifting capacity 1500 kg

Tyres

Tyre size
Air pressure in
In field In haulage
7.50*16
28 psi
14.9*28
16.9*28		 16 psi 18 psi

Overall dimensions

Specifications Data
1. Wheel base 2225 mm
2. Overall length 3860 mm
3. Overall width 1920 mm
4. Overall height 2280 mm
5. MIN. Ground clearance 420 mm
6. Weight of tractor (without ballast) No data available

Other

Specifications Data
1. Battery 12 V, 88 Ah
2. Alternator 35/42 Amps.
3. Fuel tank capacity 67 Liters

Preet 6049 tractor

Oil & Lubrication

Parts Amount Type
Engine oil 9 liters 20W40
Air cleaner 1 liter 20W40
Transmission/Hydraulics 55 liters TRACTELF (for wet brakes)
EP-80 (for dry brakes)
Power steering 2 liters 20W40
Mechanical 0.5 liter EP-140
Coolant 11 No data available
Grease As required No data available

There is no data available for implement selection.

Troubleshooting

Here are some basic problems which may happen with tractor after a long time of use or lack of maintenance and their possible reasons:

  • Engine starting problem:
    • No fuel in tank.
    • Air in fuel line.
    • Fault in injection pump.
    • Battery is not charged.
  • Low power output:
    • Fault in fuel supply.
    • Air cleaner choked.
    • Fault in fuel injection nozzles.
  • Engine overheating:
    • Fault in thermostat.
    • Loose fan belt.
    • Radiator fins are clogged.
    • Engine oil filter is blocked.
  • Low engine oil pressure:
    • Engine oil level is low.
    • There is leakage of engine oil.
    • Selection of wrong grade engine oil.

Periodic Maintenance chart for Preet 6049 tractor

Jobs Hours every
10 50 70 100
Cleaning of whole tractor ✓
Check & tight nuts ✓
Check water level in radiator ✓
Check air cleaner element ✓
Lubrication of all greasing points ✓
Check leakage of engine oil ✓
Check air pressure in tyres ✓
Clean suction strainer ✓
Change air cleaner oil if applicable ✓
Check battery electrolyte level & clean terminals ✓
Clean feed pump ✓
Drain out water fuel filters ✓
Check fan belt condition ✓
Check free play in clutch & brake paddle ✓
If dry air cleaner element then clean element ✓
Check oil level in engine & transmission ✓
Lubricate front axle center pins ✓
Lubricate king pins & lift rods ✓
Clean suction strainer ✓
Jobs Hours every
250 500 750 1000
Flush crankcase ✓
Change engine oil & oil filter ✓
Clean radiator fins ✓
Change transmission oil ✓
Clean fuel tank ✓
Change primary fuel filters ✓
Interchange front tyres to avoid improper wear ✓
Check free play in tapper bearing of front wheel ✓
Flush cooling system with clean water ✓
Change paper element of air cleaner ✓
Change strainer ✓
Change secondary fuel filter ✓
Clean front wheel hub and re lubricate ✓
Remove carbon from cylinder and cylinder head ✓
Grind valve if necessary ✓
Check play in water pump bearing ✓
Servicing of alternator, starter and battery ✓
Adjustment of valve clearance ✓
Servicing of nozzles ✓

More models:

Related Posts